BLOCK SKIRTING RUBBER

Tru-Trac Block Skirting Rubber is simple yet effective in making conveyor loading stations completely spillage free

Side Skirting

Segmented type soft & special wear resistant rubber block – fits easily onto existing or new conveyor system and ensures long life.
Segmented rubber block are supported firmly between backing plate and serrated clamp– Soft but firm contact with the belt that gives complete sealing.
Laterally guided segmented rubber blocks and specially designed serrated clamps – Conforms the lateral movement of the block can be adjusted to the profile of the belt.
Specially developed rubber compound– Ensures smooth running without belt damage, +- 55 shore hardness.
Individual replaceable blocks– substantial cost saving.
Available from 1500mm, 900mm, 600mm lengths

Available from 1500mm, 900mm, 600mm lengths

Rear Skirting Blocks

For conveyor inclined upward or for those handling fines, the sealing of the rear of the belt is necessary. The height of the rubber blocks are increased by 100mm then the standard size of side skirting sealing to compensate for trough height.

Available from 1500mm, 900mm, 600mm lengths

Rear Skirting Blocks

For conveyor inclined upward or for those handling fines, the sealing of the rear of the belt is necessary. The height of the rubber blocks are increased by 100mm then the standard size of side skirting sealing to compensate for trough height.